Legend-audio ATP 7500 User Manual download pdf (Page 13)

When you press this key, the ATP7500 goes to setup mode.

Use the up/down/left/right keys to navigate the menus.

The ATP7500 escapes from setup mode when you either

select EXIT from the OSD or press the MENU key again.

EXIT

This key exits the setup mode without saving the new settings.

Use it if you have adjusted the setup menu by accident.

SELECT/PLAY

This is the enter key in setup mode. You can us it to access

sub-menus or to activate special menu items.

▲,▼,▲,▼ (UP, DOWN, LEFT, RIGHT KEYS)

Use these keys to navigate in the menu. The up and down keys

are for selecting the parameter to be adjusted. The left and

right keys are for adjusting the parameter you have selected

with the up and down keys. The selected parameter is shown

in the OSD with a different color and in the bottom row of the

front panel display, or by an arrow in the beginning of the line.

DVD, LD, VCR1, VCR2, SAT, AUX, CD, TV, TUNER & TAPE

Selects a source input and turns unit on from “Standby”

mode. You can access all sources directly from these keys.

For example, when you press the DVD key, DVD audio and

video signals are selected and they are then processed and

fed to the appropriate outputs for listening/viewing.

7.1 C H

The 7.1 key operates in the same way as the 7.1 button on the

front panel. It gives you instant access to select the 7.1 CHANNEL

INPUT, which is deselected when the source is changed by

using either the remote control handset or the front panel

SOURCE SELECT buttons or by pressing the 7.1 CH key again.

SUR

This button places the processor into “Surround” mode.

MODE

This button toggles between Dolby Surround Pro Logic

Music, Dolby Surround Pro Logic

II Movie, DTS Neo:6

Music

and DTS Neo:6

Cinema modes.

BASS

This button sets the bass trim for the currently selected input.

STEREO

This button places the processor into “Stereo” mode.

MUSIC 7

This button places the processor into “7.1 Music” mode.

AM/FM TUNER PRESETS 1 through 10

To save the current radio station as a “preset”, press and hold

one of the 10 preset buttons until the sound mutes for

approximately 1/2 second.

Page 13

▼

M1, M2, M3 and M$

These macro buttons can send out a sequence of up to ten

(10) commands by pressing one (1) button. For further

details on the macro function, see the remote control

programming section.

ZONE

Activate remote for “Zone 2” function control (i.e. volume,

seek, input source selection, mute and off).

LIGHT

The backlight will turn on for seven seconds when the LIGHT

button is pressed. The light will remain on for another seven

seconds whenever any other button is pressed while the light

is on. The backlight will shut off automatically.

SHIFT

Allows you to toggle between AM and FM on the tuner.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Legend-audio ATP 7500 User Manual Page 13

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Legend-audio ATP 7500