Legend-audio ATP 7500 User Manual download pdf (Page 15)

Page 15

To Erase a Learned Command

From a Button

Step 1. Press the Device button and SELECT buttons

simultaneously, and hold until the orange Status LED

and the Device button turn on and remain lit.

Step 2. On the remote control, press the button that is to be

erased. The orange Status LED will flash continuously

and the Device button will turn off.

Step 3. Press the LIGHT button. The green status LED will

flash twice, then turn to a steady orange. The

Device button will turn on.

Repeat from Step 2 for any other buttons to be erased in the

selected Device mode.

Step 4.

To exit this feature, press and hold the Device button

and the SELECT button simultaneously, once again.

The orange Status LED will flash twice and then

turn off. The Device button will turn off.

To Erase All the Learned Commands

In One Device Mode

Step 1. Press the Device button and SELECT buttons

simultaneously, and hold until orange Status LED

and the Device button turn on and remain lit.

Step 2. Press and hold the LIGHT button. The red Status LED

will flash five times. Release the LIGHT button. The

Status LED will then flash green twice and then the

Device button will turn off. The Status LED will go to

a constant orange indicating

that all the learned

information on buttons in the Device mode have

been erased. The Device button will turn on.

Step 3. To exit this feature, press and hold the Device

button and the SELECT button simultaneously.

The orange Status LED will flash twice and then

turn off. The Device button will turn off.

To Erase All the Learned Commands

In All Device Modes

Warning: This procedure will erase all

learned commands on all buttons in the

CD, DVD, AUX, SAT, TV,VCR and CBL device modes.

Step 1. Press and hold the TV Device button and the LIGHT

button simultaneously. The red Status LED will flash

continuously. The Status LED will then flash green

once, orange once then turn off, indicating that all

of the learned commands on all of the Device

modes on the remote control have been erased.

Volume Punch Through

The user can have the Audio Volume controls (VOL ▲, VOL ▼

and MUTE) operate in any of the eight Device modes.

Step 1.

Press the Device and MUTE buttons, simultaneously.

Step 2. Press the

VOL ▲

button.

Step 3. Press the AVC device button to select the type of

volume control you wish to operate in that mode.

Example: If you wish to have the AVC volume operate in the

DVD mode, press the DVD Device button in Step 1. of the

instructions and the AVC Device button in Step 3.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Legend-audio ATP 7500 User Manual Page 15

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Legend-audio ATP 7500