Legend-audio ISA 828 User Manual download pdf (Page 21)

Appendix 2

Digital Card Jumper Positions - Disabling AES Outputs 5-8

Four jumpers on the digital card can be made to disable channels 5-8 on the AES Output. This is so that a standard

25-pin to 25-pin Pro Tools™ cable can be used to record channels 1-4 at 192kHz. (Half of the connections on the

Digidesign Digital Input are used for receiving and the other half for transmitting.) For more information, consult the

relevant section of the Pro Tools™ User Guide.

As shown on the card, with the jumpers in the lower position (on the bottom two pins), outputs 5-8 are enabled.

Removing the jumpers and placing them in the upper position (on the top two pins) disables outputs 5-8, as shown:

AES Outputs 5-8 enabled

AES Outputs 5-8 disabled

1 2 ... 16 17 18 19 20 21

No comments

Legend-audio ISA 828 User Manual Page 21